When replacing your factory radio with an after-market car stereo, a wire harness is a must for a quick installation. It eliminates cutting your OE radio plug helping to maintain your cars value. After connecting it, your install is simple as the wires will color-match and easily connect to the after-market stereo. Without a wiring harness you will have to cut the factory harness and then test each wire to connect to your radio.
In addition, because you do not have to cut your OE radio plug off, using an wiring harness allows you to reinstall your factory receiver at a later time. We have put this kit together with all of the parts needed for your installation. If you are doing the installation yourself the only thing you will need are common tools to take your dash apart and a good pair of crimpers to crimp the wire harnesses together with the included crimp caps.
We do recommend that on some cars if you are installing this yourself that you use a set of dash removal tools that are made to remove your dash without scratching or damaging it. Includes everything needed for installation.
Wire harness connects the aftermarket stereo harness to the vehicles factory harness. Designed specifically to fit the compatible vehicles. Wire harness will plug into the factory without cutting any wires. Standard color coded wires provide a consistent and simplified installation. Made from OEM quality materials.
Will not retain steering wheel controls if equipped. Does not work with premium factory sound systems (Alpine, Boston Acoustics, Infinity, etc). 6.2 glass panel smart sense touchscreen. Variable button color illumination (17 million color options).
Peak: 75 watts x 4 channels. Made for and works with Android, iPod and iPhone.
Standard USB cable compatible for basic audio control for iPhone and Android devices. Adaptive fast charge USB provides 2A 5V charge. Hands free wireless Bluetooth audio streaming. Stream, skip and rate tracks straight from the head unit.
Works with most Bluetooth enabled cell phones and tablets. Includes a built in microphone for clear, convenient talking.Play Back and Audio Features. Plays CDs, DVD's, AUX input and USB memory devices. Built in equalizer with 5 presets and user custom EQ. 3 sets preamp outputs (Front, rear, subwoofer). Stereo is steering wheel control ready, additional interface. This stereo has a back up camera input so that it will come on when the vehicle is put into reverse. You can view our selection of.
Back up camera's here. 2008 - 2014 Town & Country.
2008 - 2010 Grand Cherokee. 2008 - 2014 Grand Caravan. 2009 - 2012 Ram 1500. 2010 - 2012 Ram 2500 / 3500. 2011 - 2012 2500 / 3500.B ecause the factory wiring harness does not have a switched 12V power wire (EIA Color: Red) You will need to run a wire from the fuse box inside your car and connect directly to the aftermarket radio. This wire will be included with a fuse tap to make installation as easy as possible, we also sell a interface that can create this from the factory wiring though. His wire harness will not work if you have a premium factory sound system. Ie Boston Acoustics, Infinity, etc.
The car will be branded as such on the factory radio and or the front door or speakers. His package will not retain factory rear seat entertainment.
Our warehouse is full of Accessories, Amps, In Dash Receivers, Speakers, and Sub. This item ships via UPS.The item should be unopened in the same condition they were received. We strive for 5 star feedback. If you feel we did not meet this please send us a message so that we can work with you to resolve the issue. The item "BLUETOOTH GLASS PANEL TOUCHSCREEN DOUBLE 2 DIN CAR STEREO RECEIVER W INSTALL KIT" is in sale since Thursday, March 17, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Mouldings & Trim".
The seller is "carampsonline" and is located in Salt Lake City, Utah. This item can be shipped worldwide.